For Evaporator coils and condensate drain pans in commercial refrigeration.

Features:

• Bend and shape easily with hands at job site
• To replace a coil heater, measure the old heater length and bend our heater to match the configuration of the old heater and install
• The encapsulated ends on the heaters are water resistant, but should not be submerged in water
• Quickly replaces most defrost heaters
• Measure length of original and order a similar length
• The heaters are 0,250 incoloy which is comparable to alloy 334

Sometimes more than 1 heater is needed to handle a replacement. In that situation, remember the following:

• Two heaters of equal wattage. Connect in series at rated voltage. This will generate 1/2 the wattage of 1 heater. For example, 2 ea 500W heaters, 230V connected in series to 230V = 250 watts total
• Two 115V heaters with equal wattage connected in series to 230V power will generate their total wattage. For example, 2 ea 300W, 115V heaters connected in series = 600W total output
• Two heaters with equal voltage connected in parallel (at rated voltage) will produce the total of their wattages. For example, 1 ea 500W heater and 1 ea 300W heater, both 115V wired in parallel = 800W total